Removing and installing instrument cluster - AR54.30-P-6015EC

MODEL 170 

Fig 1: Identifying Instrument Cluster Remove/Install Components - Model 170

	Removal, installation
1	Disconnect ground lead from battery		AR54.10-P-0003A
2.1	Completely pull out steering wheel	Vehicles with mechanically adjustable steering column (CODE 441b)
2.2	Remove steering wheel	Vehicles without mechanically adjustable steering (CODE 441b)	AR46.10-P-0100B
		Caution when handling airbag unit. Improper handling can lead to damage to airbag unit
3	Remove cover below instrument panel (driver's side)		AR68.10-P-1500G
4	Unscrew screws (3) for covering on instrument cluster (2)
5	Remove covering on instrument cluster (2) toward front	For this purpose press instrument panel upward at center over instrument cluster
6	Unscrew screws for instrument cluster (1)
7	Remove instrument cluster (A1) toward front
8	Unlock and disconnect electrical connectors (62, 63)
9	Remove instrument cluster (A1) in direction of driver's door
10	Reinstall in opposite order
11	If necessary code instrument cluster with HHT	See Diagnosis Manual