Removing and installing fog lamp - AR82.10-P-5103G

MODEL 129 

Fig 1: Identifying Fog Lamp Components

	Removing, installing
1	Remove bottom wheelhouse paneling
2	Pull fog lamp connector (E5/1x1, E5/2x1) out of clip (1) and disconnect	As of production date 09/95 the connector is separated from the fog lamp housing
3	Unscrew screws (2) and remove fog lamp (E5/1, E5/2) toward rear
4	Install in the reverse order
5	Perform function check
6	Check fog lamp adjustment, correct		AP82.10-P-8260A