Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
MODEL 129 as of 1.7.00 with CODE (854) MB portable cellular telephone
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries. | No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 2 | Disconnect ground cable of battery | AR54.10-P-0003A | |
| Notes on battery | All models | AH54.10-P-0001-01A | |
| 3 | Remove left paneling in trunk | ||
| 4 | Unscrew nuts (2) and screw (3) | ||
| 5 | Carefully pry bracket (1) together with control module out of wheelhouse recess | ||
| 6.1 | Disconnect connection lead from CTEL interface (A34/4) | ||
| 6.2 | Disconnect connection lead from E-network compensator (A28/3) | ||
| 7 | Unscrew 2 screws (4) from bracket (1) of E-network compensator (A28/3) | ||
| 8. | Install in the reverse order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |