Removing and installing cover at gearshift lever - AR68.20-P-2310B

MODEL 140 

with CODE (350b) Information and communication system (ICS) 

with CODE (498) Japanese version 

Fig 1: Identifying Cover At Gearshift Lever Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removing, installing
1	Take insert (1) out of the ashtray
2	Slacken screw (2) of trim panel (3) and take off trim panel	Use only set of torx wrenches to slacken screws (2) of the trim panel
3	Take off surround (4) at selector lever
4	Remove screws (5)
5	Raise bottom cover (6) in area of ashtray and take off to the front
6	Unplug electrical connections from the switches
7	Install in the reverse order