Removing and installing wire cable/transmission for parking lock interlock on transmission - AR27.60-P-0500-05A

For removal and installation, shift selector lever or range selector lever into position "P" and, with wire cable/transmission removed, leave in position "P".

Removing 

1. Using suitable tool, slacken locking device on linkage for parking lock interlock (50) and pull off wire cable/transmission (80) in direction of arrow.

Installing 

2. Mount wire cable/transmission (80).

   After installation, check function of parking shift lock. 

   Fig 1: Identifying Wire Cable/Transmission For Parking Lock Interlock On Transmission Components

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.