Removing, installing inner track rod with axial joint - AR46.40-P-0201A

MODEL 210 

Fig 1: Identifying Inner Track Rod With Axial Joint

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removing, installing
1	Remove drag link		AR46.40-P-0200C
2	Remove bellows		AR46.40-P-0400A
3	Steady gear rack using an open-end wrench (arrow)
4	Use 36mm open-end wrench attachment (012) to detach inner tie rod with axial joint (12)	Do not use force (hammer blows, heavy leverage)
		Open-end wrench	Fig 2
			*BA46.40-P-1003-01A
5	Install in reverse order

Tie rod

Number	Designation		Model 210
BA46.40-P-1003-01A	Inner tie rod with axial joint on gear rack joint	Nm	110

Fig 2: Identifying Open-End Wrench (220 589 01 01 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.