Removing and installing jacket tube pressure element - AR46.10-P-0600-04A

Repair materials

Number	Designation	Order number
BR00.45-Z-1009-06A	Multi-purpose paste	A 000 989 80 51 10

Remove

Remove retaining ring (83b), spring washers and pressure element from jacket tube (81a).

The jacket tube (81a) is equipped with 2 spring packages (spring washer and pressure element).

Fig 1: Identifying Jacket Tube With Spring Packages And Retaining Ring
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Installing
Grease pressure element (83) and spring washer package (83a) with multi-purpose grease and install in outer jacket tube (81a).
Tension spring washers (83a) with suitable punch or pipe on manual press.
Insert new retaining ring (83b) into groove.

1st version

Fig 2: Identifying Grease Pressure Element And Spring Washer Package With Multi-Purpose Grease - 1st Version

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

2nd version

Fig 3: Identifying Spring Washer Package With Pressure Element - 2nd Version

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.