LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1997 >> E320 >> Repair and Diagnosis >> Steering >> Power Steering >> Steering - 210 Chassis >> Testing & Repair >> Remove/install height adjustment motor - AR46.10-P-0600-05I

Remove/install height adjustment motor - AR46.10-P-0600-05I

TORQUE SPECIFICATION Jacket tube

Number Designation Model 210 Model 215
BA46.10-P-1011-03D Height adjustment motor to mounting Nm 4 4
TORQUE SPECIFICATION Jacket tube

Number Designation Model 220 Model 230
BA46.10-P-1011-03D Height adjustment motor to mounting Nm 4 4

Removing 

  1. Unclip height adjustment up/down motor connector (M20x2).
  2. Detach cable holder (61).
  3. Remove bolts of height adjustment up/down motor (M20m2).
  4. Remove height adjustment up/down motor (M20m2) and detach gearing connection piece (60e).

    Shown on model 220 

    Fig 1: Identifying Up/Down Motor Connector And Cable Holder
    G04625089Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

    Install 

  5. Insert height adjustment up/down motor (M20m2) and slide on gearing connection piece (60e).
  6. Install bolts.
  7. Align height adjustment up/down motor (M20m2) centrally with mounting console notch (arrow) and tighten bolts.
  8. Attach cable holder (61).
scientia non olet · About LEMON Manuals