LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1997 >> E320 >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Power Seats - E55, E300, E320 & E430) >> System Tests (Front Heated Seats) >> Test 4: Cockpit Switch Group Circuit 31 Internal Connection

Test 4: Cockpit Switch Group Circuit 31 Internal Connection

WARNING: This page is about a different car, the 1999 Mercedes-Benz E55, 1998 Mercedes-Benz E430, 1998 Mercedes-Benz E320, and 1998 Mercedes-Benz E300. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to LOCK position. Disconnect cockpit switch group harness connector. Measure resistance between terminal No. 31 at cockpit switch group harness connector and pin No. 4 at cockpit switch group. If resistance is one ohm or less, cockpit switch group circuit 31 internal connection is okay at this time. If resistance is greater than one ohm, replace cockpit switch group.

scientia non olet · About LEMON Manuals