Removing/installing the starter - AR15.30-P-7100FBF

ENGINE 604.917 in MODEL 210.003 

ENGINE 604.912 in MODEL 210.004 

ENGINE 605.912 in MODELS 210.010/210 /610 

ENGINE 605.962 in MODEL 210.015 /215 

ENGINE 602.982 in MODELS 210.017 /217 /617 

ENGINE 606.912 in MODEL 210.020 

ENGINE 606.962 in MODELS 210.025 /225 

Fig 1: Identifying Starter Components (Engine 602, 604, 605 & 606)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removing/installing
	Risk of explosion  caused by oxyhydrogen gas. Risk of poisoning and caustic burns  caused by swallowing battery acid. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead acid batteries	No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
1	Disconnect battery ground cable	Insulate cable terminal of ground lead to prevent unintentional contact between disconnected ground lead and ground point W10	AR54.10-P-0003A
	Notes on battery	All models	AH54.10-P-0001-01A
2	Detach bottom sections of soundproofing		AR94.30-P-5300AB
3	Disconnect electric cables (1, 2)	Nut for connection of terminal 30	*BA15.30-P-1001-01C
		Nut for connection of circuit 50	*BA15.30-P-1002-01C
4	Remove bracket (4)
5	Remove bolts (3)	Starter bolt	*BA15.30-P-1003-01C
6	Take starter (M1) down and out
7	Install in reverse order
8	Perform function check
9	Make electrical system ready for operation	Carry out basic programming.	AR00.19-P-0200D

Starter