Removing and installing exhaust manifold - AR14.10-P-3915G

ENGINE 104.94 /99, 111.920 /921 /940 /943 /944 /945 /946 /947 /96 /970 /973 /974 /975 /977 (except, 104.990)

Shown on engine 111.940

Fig 1: Identifying Gasket - Shown On Engine 111.940

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 111.942/962/970

Fig 2: Identifying Exhaust Manifold - Engine 111.942/962/970

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 104

Fig 3: Identifying Exhaust Manifold - Engine 104

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Exhaust Manifold Gasket

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 111.944

Fig 5: Identifying Exhaust Manifold - Engine 111.944

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 6: Identifying Heat Shield

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 111.943/946/973

Fig 7: Identifying Exhaust Manifold - Engine 111.943/946/973

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 111.945/947/975/977

Arrow Exhaust manifold bracket

Fig 8: Identifying Exhaust Manifold Bracket - Engine 111.945/947/975/977

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig. item, etc.	Work instructions
	Remove lambda sensor, install	Engine 111	AR14.00-P-5303D
	Remove suction connection at compressor, install	Engine 111.943/947/973/975	AR09.50-P-8821A
	Replace rivet nuts in exhaust manifold	If necessary	AR49.10-P-5531-01DA
156/3, 156/4	Gasket	Installing : apply dots of sealing compound to facilitate installation.	*BR00.45-Z-1010-01A
		Engine 104 : insert gaskets with metal side facing toward cylinder head
Arrow	Exhaust manifold bracket	Engine 111 in model 163, 208
	Exhaust manifold in a double-wall design		BT14.10-P-9404-01G

Repair materials

Number	Designation	Order number
BR00.45-Z-1010-01A	Sealant	A 001 989 25 20