Control buttons, location/task - GF54.30-P-2004B

MODEL 202 as of 1.8.96, 208 up to 31.7.99, 210 as of 1.6.96 up to 30.6.99 

The instrument cluster has various control buttons which are located on its left and right side.

• The control buttons "+" and "-" (on the left side of the instrument cluster) are used to adjust the instrument illumination.
• The control button "0" (on the left side of the instrument cluster) is used to reset the trip odometer.

  On model 210 as of 15.02.96, model 208 as of start of production and on other models as of 06.97 it also serves to operate the Active Service System (ASSYST).

• The control buttons "h" and "m" (on the right side of the instrument cluster) are used to adjust the clock.
• The control button "R" (on the right side of the instrument cluster) is used to reset the multi-function display (model 210 with multifunction display only).

  	Active Service System (ASSYST) Operating instructions, resetting	Engines 112, 113, 611 (engines with oil sensor)	GF00.20-P-0003-01A
  		Model 210 as of 01.03.97 with engines 111, 602, 604, 605 and 606 As of 06.97 models 129, 140, 170, 202 except engines 112, 113, 611 (valid for engines with oil level switch)	GF00.20-P-0003-01B
  	Electronic clock		GF54.30-P-3011A
  	Purpose/function of terminal 58d, instrument display illumination		GF54.30-P-3008A