Adjusting crank window in front door - AR72.10-P-1950E

MODEL 202, 210 

Illustrated on model 202 

Fig 1: Identifying Crank Window

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Window Lift Rail And Crank Window Bolts

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Testing
1	Check installation position of crank window on window frame.	Left figure, crank window not completely closed, glass edge parallel to window guide rail
2	Check installation position on vertical window guide rail	Left figure, horizontal arrows, crank window should be positioned completely in window guide rail.
	Removal, installation
3	Remove window crank	Model 202	AR72.10-P-1100GV
4	Remove door liner on front door	Model 202	AR72.10-P-1000E
		Model 210	AR72.10-P-1000F
5	Remove foil
	Adjustment
6	Loosen bolt (2), correct position of crank window upward and downward, simultaneously press to rear into vertical window guide rail, tighten bolt (2).
7	Check crank window for easy motion
8	Install in reverse order