Manual raising/lowering of power windows function - GF72.29-P-3006A

MODELS 202 as of 1.6.97, 208, 210.081 /281 (except 208.4), 210 (except 210.081 /281) as of 1.3.97 

Function prerequisites 

• No overvoltage/undervoltage
• Circuit 15 on or circuit 15R on

Function 

The manual window raising/lowering function is triggered by pressing the power window switch  as far as the first click-stop position in the "open" or "close" direction. The corresponding door control module  receives a CAN message and actuates the relevant power window  until another switch position is signaled.

Interruption of function 

The function is aborted if

• lock-up  of the power window is detected,
• the function prerequisites are no longer satisfied.

	Power window position recognition		GF72.29-P-4000A
	Power windows in front doors		GF72.29-P-4101A
	Rear door control module	MODELS 202/210 only	GF72.29-P-4102A
	Driver-side front door control module		GF72.29-P-4105A
	Passenger-side front door control module		GF72.29-P-4106A
	Power window switch, center console		GF72.29-P-4103A
	Power window switch, rear doors	MODELS 202/210 only	GF72.29-P-4104A