Removing and installing glove box - AR68.10-P-1400F
MODEL 210
| Removal, installation | |||
| 1 | Open glove box cover | ||
| 2 | Unclip glove box illumination (1) (arrow) and pull off electrical connector | ||
| 3 | Remove plugs (2 and 3) | ||
| 4 | Unscrew screws (4, 5, 6, 7, 8 and 9) | ||
| 5 | Pull glove box (10) complete with cover out of instrument panel | ||
| 6 | Guide electrical wires for illumination through glove box | ||
| 7 | Set down glove box (10) | ||
| 8 | Reinstall in opposite order |