MSC diagnosis previous knowledge notes on version coding - AD88.79-P-2000-05B

The control modules N32/1, N32/2, N69/1 and N69/2 can be coded any number of times.

The following data must be coded with the HHT for new control modules which are connected to battery voltage for the first time:

Front driver-/front passenger-side door control module (N69/1, N69/2) 

Coding 

• /ECE
• Rest of world

Coding equipment 

• Electric seat adjustment YES/NO

Left/right front ESA control modules (with memory) (N32/1, N32/2) 

Variant coding model 210 

• AEG (Hammerstein) seat adjustment motors with preset head restraint
• AEG (Hammerstein) seat adjustment motors without preset head restraint
• Bosch (Brose) seat adjustment motors with preset head restraint
• Bosch (Brose) seat adjustment motors without preset head restraint
• Steering column adjustment, active/inactive

Variant coding model 208 

• AEG (Hammerstein) seat adjustment motors with preset head restraint
• AEG (Hammerstein) seat adjustment motors without preset head restraint