Radio frequency locking/remote central locking (RFL/RCL) diagnosis, fault memory (Fault Code B1000, B1010, B1011, B1021, B1024, B1025, B1054, B1055, B1057, B1059, B1148, B1156, B1157) - AD80.35-P-4000B

MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 as of 1.3.97 

		Prerequisites for reading out fault memory
I		Fuses in order
II		Battery voltage > 11 V
III		Voltage supply of control modules and CAN data buses in order		Body DM Volume 2
IV		Connect Hand-Held Tester in accordance with connecting diagram		AD00.00-P-1000AZ
Fault code		Possible cause	Fault code memory location	Remedy
B1000	004	Electronic ignition switch control module (N73)	EZS	Replace N73
B1000	005	Electronic ignition switch control module (N73)	EZS	Replace N73
B1000	008	Electronic ignition switch control module (N73)	EZS	Ignore fault, erase fault memory
B1000		Overhead control panel control module (N70)	DBE	Replace N70
B1000		Driver-side signal-acquisition and actuation module (SAM) (N10/1)	SAM	Replace N10/1
B1010		Undervoltage	EZS	Body DM Volume 2
B1011		Overvoltage	EZS	Body DM Volume 2
B1021		CAN: PSE interferes with communication	EZS	Body DM Volume 2
B1024		CAN L: Data bus	EZS	Body DM Volume 2
B1025		CAN H: Data bus	EZS	Body DM Volume 2
B1054		CAN: Door control module 2 (LHS)/door control module (RHS) interferes with communication	EZS	Body DM Volume 2
B1055		CAN: Door control module 1 (LHS)/door control module (RHS) interferes with communication	EZS	Body DM Volume 2
B1057		CAN: Overhead control panel control module (N10/1) interferes with communication	EZS	Body DM Volume 2
B1059		CAN: Signal-acquisition and actuation module (N10/1) interferes with communication	EZS	Body DM Volume 2
B1148		Output Terminal 50	EZS	Replace N73
B1156	000	Electric steering column (ESC) control module (N26/5):	EZS	AD80.35-P-6000-33A
	001			AD80.35-P-6000-34A
	002 003 004 005			N26/5
B1157	000	Electric steering column (ESC) control module (N26/5):	EZS	AD80.35-P-6000-33A
	00I			AD80.35-P-6000-34A
	002 003 004 005			N26/5