Notes on pneumatics testing, diagnosis, advanced information, PSE - AD80.20-P-2000-06B
- Before testing the safety switching time of ancillaries, interrupt the voltage supply to the pneumatic system equipment for ≥ 3 seconds.
- Following the test on the pneumatic system equipment, interrupt the voltage for approx. 3 seconds (erasing safety memory).
- After completion of the test on the pneumatic system equipment , no pressure or vacuum should be demanded for approx. 10 minutes.
Parts for the test
| 1 | Reservoir | 107 800 08 19 |
| 1 | Distributor fitting | 117 078 01 45 |
| 1 | Rubber hose, 50 mm long | 007 997 61 82 |
| 1 | Bush | 202 800 05 53 |
| 2 | Pneumatic line, 1 m long | 000 158 14 35 |
| 5 | Rubber cap | 000 987 11 45 |