Notes on function check actual values, diagnosis, advanced information, PSE - AD80.20-P-2000-04B

It should be noted when interrogating the actual values and in the case of actuations that not all actual values and actuations of the CL, RTR, MCS and RHR systems can be found in the PSE control module (combined) (A37). 

The actual values and actuations not present in the PSE control module (combined) (A37) can be found in the driver-side signal-acquisition and actuation module (SAM) (N10/1) or in the lower control field control module (N72). 

Abbreviations 

• PSE  Pneumatic system equipment (combined functions)
• SAM  Driver-side signal-acquisition and actuation module
• UBF  Lower control field control module (N72)

These abbreviations are shown in the function check actual values table and are used to show which control module the actual values or actuations are stored in.