Adjusting wiper system - AR82.30-P-6400-01E

Revisions

27.2.97

Adjustment values for model 210 added

Test and adjustment data wiper

Number	Designation			Model 202	Model 208
BE82.30-P-1001-01A	Dimensions	Distance "A" between wiper gear head and windshield	mm	5-8	8-12
		See figure		AR82.30-P-6400-01E	AR82.30-P-6400-01E
BE82.30-P-1002-01A	Dimensions	Distance "B" between wiper arm and wiper blade	mm	5	5
		See figure		AR82.30-P-6400-01E	AR82.30-P-6400-01E

Test and adjustment data wiper

Number	Designation			Model 210
BE82.30-P-1001-01A	Dimensions	Distance "A" between wiper gear head and windshield	mm	8-12
		See figure		AR82.30-P-6400-01E
BE82.30-P-1002-01A	Dimensions	Distance "B" between wiper arm and wiper blade	mm	5
		See figure		AR82.30-P-6400-01E

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Check distance "A", wiper gear head - windshield using a feeler gauge.
   Fig 2: Identifying Distance A, Wiper Gear Head - Windshield

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
2. The distance from wiper gear head to windshield can be adjusted by slackening the bolt (2). Wiper arm must be in vertical position.
   Fig 3: Identifying Adjusting Bolt

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
3. Check distance "B", wiper arm - wiper blade using a feeler gauge.
4. If the distance is less than 5 mm, bend wiper arm toward windshield until the gauge can be inserted.
   Fig 4: Identifying Distance B, Wiper Arm - Wiper Blade

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.