Detaching and attaching heat shield of steering coupling - AR46.10-P-0400-01B

Steering shaft

Number	Designation		Model 210
BA46.10-P-1001-01B	Bolt for steering coupling	Nm	20

Unscrew bolt (25b) from steering coupling and remove heat shield (25c), opening the upper fastening clips (arrow) on the left and right.

Installation

Replace self-locking nut, observe tightening torque.

Fig 1: Locating Steering Coupling Heat Shield Self-Locking Nut

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Models 210.08/28

Detach and attach upper heat shield (arrow) if necessary.

Fig 2: Locating Upper Heat Shield

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.