Function of electric steering column adjustment - GF46.15-P-2000A

MODEL 210.081 /281, 210 (except 210.081 /281) as of 1.3.97 with CODE (275a) Memory package (driver's seat, steering column, mirrors) 

Function prerequisites 

• Voltage not too high or too low

and

• Circuit 15 on or
• Circuit 15R on or
• Driver's door open.

Actuation of the steering column up/down switch (S91s11)  or the steering column in/out switch (S91s12)  is read in by the front driver-side door control module (N69/1)  . The door control module transmits a CAN-message for adjusting the steering column in the selected direction to the driver-side ESA control module (N32/1)  as long as the switch is pressed and the function prerequisites  are fulfilled. The CAN-message can be transmitted for a maximum of 50 seconds. The driver-side ESA control module (N32/1)  controls the motors for adjusting the steering column accordingly.

	Storing position		GF91.29-P-2004A
	Calling up stored position		GF91.29-P-2003A
	Control of front seat adjustment motor group		GF91.29-P-3003A
	Steering column adjustment motor group		GF46.15-P-4101A