Retrofitting closing loop on tailgate - AN68.30-P-1050-01FA

Widen existing holes (arrows) in tailgate.
Drilling diameter 6 mm.
Install M4 rivet nut.

Fig 1: Identifying Widen Existing Holes
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Use a drift to pierce guides for securing screws (arrows) in tailgate lining.

Fig 2: Identifying Securing Screws In Tailgate Lining
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Screw on closing loop (arrows) and install new trim.

Fig 3: Identifying Closing Loop Screw
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.