Electrical headlamp range adjustment (HRA), electrical test - AD82.10-P-6000A

MODEL 208 with CODE (612) Xenon headlamp unit 

	Risk of death  caused by high voltage levels present at xenon headlamps. Risk of explosion/risk of fire  due to highly flammable materials in the area of damaged xenon bulbs Risk of injury  from UV light, hot components at xenon headlamps and glass splinters when xenon bulbs crack Risk of poisoning  from inhaling mercury vapors and from swallowing/skin contact with poisonous salts and mercury compounds	Do not come into contact with parts that are under high voltage. Persons with active electronic implants  (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulating safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure the work area is adequately ventilated.	AS82.10-Z-0001-01A
	Electrical headlamp range adjustment (HRA) diagnosis, previous knowledge		AD82.10-P-2000A
	Ignition: OFF
	Test
1	Power supply, electrical test of HRA		AD82.10-P-6000-02A
2	Optical signal, electrical test of HRA		AD82.10-P-6000-03A
3	Headlamp range adjustment rear axle sensor, electrical test of HRA	as of 1.6.98	AD82.10-P-6000-04A
4	Headlamp range adjustment front axle sensor, electrical test of HRA	as of 1.6.98	AD82.10-P-6000-05A
5	Motor for left headlamp range adjustment, electrical test of HRA	as of 1.6.98	AD82.10-P-6000-06A
6	Motor for right headlamp range adjustment, electrical test of HRA	as of 1.6.98	AD82.10-P-6000-07A