Removing and installing front floor covering (on right) - AR68.20-P-2070F

MODEL 210 

Fig 1: Identifying Front Floor Covering (On Right) Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal, installation
1	Pull cover (1) on longitudinal member upwards (3 clips) and pull off edge guard (10) in area of paneling (5)
2	Press out cover (2) and unscrew screw (3)
3	Unclip clips (4, 2 each) and remove paneling (5) towards rear
4	Turn plastic screw (6) 90° and remove cover (7, footwell air outlet)
5	Lift floor covering (8) at rear and remove	Installation:  When installing insert floor covering (8) in area of center console (arrows)
6	Reinstall in opposite order