LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1997 >> E320 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Equipment - 210 Chassis >> Retrofitting & Conversion >> Stamping opening in trim of rear roof frame - AN68.30-P-4470-01FA

Stamping opening in trim of rear roof frame - AN68.30-P-4470-01FA

  1. Stamping opening for the seat-belt guide bracket fastening in trim of roof frame.

    IMPORTANT The opening's position is imprinted on the reverse side of the trim.

    Fig 1: Identifying Rear Roof Frame Dimensions
    G04632641Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals