Connecting compression tester - AR01.10-P-0010-01C

Engine 111 in model 170 

Fig 1: Identifying Compression Pressure Recorder (001 589 76 21 00)

Fig 2: Identifying Adapter Cable For 1.5 mm Pin (170 589 02 63 00)

Fig 3: Identifying Electrical Connection Set (201 589 00 99 00)

1. Open cover (1) of terminal block (X12/3).
2. Connect clamp (A) of compression recorder to terminal block (X12/3).
   Fig 4: Identifying Cover, Clamp And Terminal Block

   
3. Unscrew cover of module box.
4. Separate engine/body connector (X26/25).
5. Connect adapter cable (01) to socket 9 of the engine/body connector (X26/25).
6. Connect adapter cable (01) to the cable of the compression recorder.
   Fig 5: Identifying Adapter Cable, Engine/Body Connector