Install rear window - AR67.20-P-2000-05D

WORKSHOP EQUIPMENT

WE58.40-Z-1029-11A

Cup suction tool for window removal and installation

Position both suction cups on rear window.
Center rear window above window cutout with second mechanic and position so that strips of tape coincide.
Position rear window on glue bead and press on until it makes contact with rubber spacers.
On model 210.02, with tailgate, the window must rest on the cover.

Open a crank window in the vehicle so that air is not trapped when the door is closed, thereby pressing the windshield outwards.

Install rear window within 10 minutes after applying glue bead before adhesive force of glue starts to decrease

Curing time is approx. 1 hour calculated from the time the rear window is installed.