Removing and installing electric roller blind for rear window - AR68.50-P-4600E

MODEL 202 with CODE (540a) Electric roller blind for rear window 

Fig 1: Identifying Electric Roller Blind For Rear Window Remove/Install Components - Model 202 With Code (540a)

	Removing, installing
1	Disconnect ground lead from battery
2	Remove rear shelf		AR68.30-P-4580E
3	Unscrew nuts (1) from trunk side		Fig 2
		Tighten nuts (1) only after installing rear shelf.	*BA68.50-P-1001-01A
4	Disconnect connector (M24x1)
5	Remove roller blind (2)	If necessary align roller blind (2) when installing.
6	Install in the reverse order

CURTAINS/ROLLER BLINDS

Number	Designation		Model 202
BA68.50-P-1001-01A	Nut for roller blind mount	Nm	6.5...7.0

Special tool 

Fig 2: Identifying Torque Wrench (001 589 72 21 00)