Using fixing mounts and templates - AR68.20-P-2030-02EC
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1011-20A | Universal profile milling machine with surface milling cutter (3 single lip miller Ø 5 x 60mm, 2 single lip miller Ø 5 x 90mm, templates, fixing supports for model 129, 170, 202, 208, 210, 463), Firma Fetzer GmbH 75446 Wiernsheim-Pinache |
Bottom cover
For plastic or veneered extruded covers.
It is necessary to use the aluminum strips provided between the cover and upper section of the milling table in the area of the switch cutout.
Fig 1: Identifying Fixing Mounts And Templates - Bottom Cover (For Plastic Or Veneered Extruded Covers - 1 Of 2)
On cutouts for the power window switches, it is necessary to surface mill the rear of the cover.
It is necessary to use the aluminum strips (1) provided between the cover and upper section of the milling table in the area of the switch cutout.
Surface mill rear of cover to depth of 0.5 mm. For this purpose, use 90 mm dia. cutter and template K1.3/202.