Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
MODEL 129, 202
Fig 1: Identifying Removing And Installing Bulb Of Front Turn Signal Lamp Components - Model 129, 202
| Removal, installation | |||
| 1 | Open engine hood, raise to upright position | Model 202 Model 129 see Owner's Manual |
AR88.40-P-1000E |
| 2.1 | Remove windshield washer water reservoir | Model 129 |
|
| 3 | Unclip turn signal lamp (E6/1, E6/2) and remove | ||
| 4 | Unplug electrical connector (14) | ||
| 5 | Turn socket (15) to the left and take out | ||
| 6 | Turn bulb (16) out of bayonet lock | ||
| 7 | Install in the reverse order | ||
| 8 | Carry out operational check |