Removing and installing bracket for cellular telephone - AR82.70-P-8918CA
MODEL 202.07 /08 /09 /18 /19 as of 1.7.00 with CODE (854) MB cellular telephone Bracket for cellular telephone in armrest or stowage compartment, in combination with Audio series radio or Audio 30 APS
Fig 1: Identifying Bracket For Cellular Telephone Remove/Install Components - Model 202.07 /08 /09 /18 /19 As Of 1.7.00 With Code (854)
Fig 2: Identifying Handset Transmitter/Receiver Connector And Antenna Connection - Model 202.07 /08 /09 /18 /19 As Of 1.7.00 With Code (854)
| Removal, installation | |||
| 1 | Remove cellular telephone from bracket (5) | ||
| 2 | Open stowage compartment | ||
| 3 | Disconnect handset transmitter/receiver connector (X39/5) and antenna connection (17) | ||
| 4 | Unscrew screws (10) and remove plate (13) | ||
| 5 | Separate CTEL handset connector (A34x1) and antenna (17) and remove adapter cable (14) | ||
| 6 | Pull bracket for cellular telephone (5) out of base bracket (8) | ||
| 7 | Remove screws (7) out of base bracket (8) | ||
| 8 | Remove base bracket (8) | ||
| 9 | Install in the reverse order |