Checking follower joint of steering knuckle mount (installed) - AR33.20-P-0426A

MODEL 140 

MODEL 170 

MODEL 202 

MODEL 208 

MODEL 210 (except 210.08 /28) 

MODEL 240 

Fig 1: Checking Follower Joint Of Steering Knuckle Mount - Model 202 (1 Of 2)

Fig 2: Checking Follower Joint Of Steering Knuckle Mount - Model 202 (2 Of 2)

	Checking
1	Lift up vehicle at the front
2	Check boot (8f) Check for cracks and damage if findings are negative: ↓ Replace upper transverse control arm (6):
		Model 140	AR33.20-P-0500A
		Model 170, 202, 208	AR33.20-P-0500B
		Model 210	AR33.20-P-0500C
		Model 240	AR33.20-P-0500H
3	Check play in follower joint	By pulling and pushing firmly on the front wheel when simultaneously feeling the upper ball joint. If in poor condition: ↓ Replace upper transverse control arm (6):
		Model 140	AR33.20-P-0500A
		Model 170, 202, 208	AR33.20-P-0500B
		Model 210	AR33.20-P-0500C
		Model 240	AR33.20-P-0500H