Correcting oil level in air conditioning following repair or slow refrigerant loss - AR83.30-P-5251E
MODEL 163 with CODE (580) Air conditioning or Tempmatic for USA A/C compressor 7SB16
MODEL 202 with CODE (580) Air conditioning or Tempmatic for USA with CODE (581a) Air conditioning (Automatic) A/C compressor ND6CA17, A/C compressor 7SB16
MODEL 208 with CODE (580) Air conditioning or Tempmatic for USA with CODE (581a) Air conditioning (Automatic) A/C compressor 7SB16
MODEL 210 with CODE (580) Air conditioning or Tempmatic for USA with CODE (581a) Air conditioning (Automatic) A/C compressor 7SB16
MODELS 215, 220 A/C compressor 7SE16
| Correct oil level | |||
| Carry out work quickly, compressor oil is hygroscopic. When evacuating refrigerant, the quantity of compressor oil evacuated must be added again to refrigerant circuit when refilling air conditioning (new oil) |
|||
| 1 | If loss of refrigerant is < 400 g (no leakage detectable) do not add compressor oil ↓ | ||
| Carry out leak-tightness test | |||
| 2 | If loss of refrigerant is > 400 g (leakage detectable) fill with new compressor oil, also ↓ | *BF83.55-P-1009-01A | |
| Replace fluid reservoir | Models 202, 208, 210 | AR83.30-P-6520E | |
| Model 163 | AR83.30-P-6520GH | ||
| Models 215, 220 | AR83.30-P-6520M |
| Number | Designation | A/C compressor 7SB16 in models 140, 170, 202, 208, 210 | A/C compressor ND6CA17 in model 202 | A/C compressor 7SB16 Refrigerant R134a in model 163 | ||
|---|---|---|---|---|---|---|
| BF83.55-P-1009-01A | Additional oil capacity when leakage detected | Compressor oil | cm3 | 20 | 20 | 20 |
| Specifications for service products | Sheet | BB00.40-P-0362-00A | BB00.40-P-0362-00A | BB00.40-P-0362-00A | ||
| Number | Designation | A/C compressor 7SE16 in model 215 | A/C compressor 7SE16 in model 220 | ||
|---|---|---|---|---|---|
| BF83.55-P-1009-01A | Additional oil capacity when leakage detected | Compressor oil | cm3 | 20 | 20 |
| Specifications for service products | Sheet | BB00.40-P-0362-00A | BB00.40-P-0362-00A | ||