Remove/install charge air pipe - AR09.41-P-1311H

ENGINE 602.982 in MODEL 210.017 /217

ENGINE 605.960 in MODEL 202.128

ENGINE 605.962 in MODEL 210.015 /215

Fig 1: Identifying Charge Air Pipe Remove/Install Components - Engine 605.960

MODIFICATION NOTES

21.1.98

charge air hoses, charge air cooler with an extended slip on length

Refer to Step 3

Fig. item, etc.	Work instructions
	Charge air hoses	Traces of oil, low oil quantities in the charge air hoses come from the crankcase ventilation and are permissible.
		Installation: Clean the connection points with a cleaning agent. Charge air hoses or pipes may come off during operation if the connection points are not clean. attach the charge air hose with a spring segment-hose clips, see ↓	*BR00.45-Z-1004-04A
	charge air hoses, charge air cooler with an extended slip on length		BT09.41-P-0001-01A
	Hose clamps		*BA09.41-P-1002-01A
B17	Intake air temperature sensor	Detach coupling, press back retaining clamps
110/6	Charge air pipe	Check rubber mount (110/7), replace if necessary.

CHARGE AIR PIPE/CHARGE AIR COOLING

Number	Designation		Engine 602.982/983	Engine 605.960/962
BA09.41-P-1002-01A	Hose clamps of charge air pipes/hoses	Nm	4	4

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1004-04A	Stain removal solution	A 001 986 28 71