Install paneling - AR77.20-P-0500-02EA

Electric sliding/pop-up roof, steel version (code 412b and D27) 

Shown on model 202 

1. Position sliding element (3) horizontally at tilting brackets.
2. Open sliding/pop-up roof.
   Fig 1: Identifying Sliding Element

   
3. Insert paneling (1) and slide toward rear.
4. Clip paneling (1) into sliding/pop-up roof cover.
   Fig 2: Identifying Paneling

   
5. Position sliding/pop-up roof half way in pop-up position. Check whether side moldings (4) can be pulled in or out.
   Fig 3: Identifying Side Moldings