General information on repair to detachable plastic components - AH88.00-P-1000-01A

Model 124, 129, 140, 168, 202, 208, 210, 414 

• The repair to be performed should be economical, e.g. the costs for labor and material (without painting) should not exceed 75 % of the replacement part prices.
• Repair with materials from Teroson plastic repair box in the event of damages to:
  • bumper paneling, bumper protective moldings on all models.
  • Front fender on models 168, 414 in form of abrasions deeper than 1 mm
  • Cracks and holes < 40 mm.

  Exception:  Tailgate on models 168, 414. Here repair only abrasions deeper than 1 mm.

• Drill hole at end of cracks with a 5 mm dia. bit
• Small belt sanders are recommended for sanding work for preparing plastic repair

  Round orbital sanders are recommended for sanding work on the cured plastic repair point and preparation for paint-work.

• Sand repaired area only on side to be painted.
• Abrasions < 1 mm can be repaired with the usual paint repair method