Removing and installing transponder coil - AR80.30-P-4515G

MODEL 170 up to 31.5.97 

Fig 1: Identifying Transponder Coil Remove/Install Components

	Removal, installation
1	Remove top section of instrument panel		AR68.10-P-1020G
2	Disconnect 2-pin connector for transponder coil (3) from IR DAS control module (N54/1)
3	Press transponder coil (L11) off of steering lock cover sleeve (6) with long wedge	Insert long wedge (5) directly between steering lock cover sleeve (6) and transponder coil (L11)	Figure
4	Reinstall in opposite order

Fig 2: Identifying Long Wedge (115 589 03 59 00)