Removing and installing transponder coil - AR80.30-P-4515F

MODEL 202 as of 1.8.96 up to 31.5.97 

MODEL 202.083 up to 31.5.97 

MODEL 210 as of 1.6.96 up to 28.2.97 

MODEL 210.072 up to 28.2.97 with CODE (491) USA version 

MODEL 210.2 up to 28.2.97 

Fig 1: Identifying Transponder Coil Components

	Removal, installation
1	Remove instrument cluster		AR54.30-P-6015EA
2	Disconnect 2-pin connector for transponder coil (2) from IR DAS control module (N54/1)
3	Press transponder coil (L11) off of steering lock cover sleeve (6) with long wedge (5)	Press long wedge (5) directly between steering lock cover sleeve (6) and transponder coil (L11)	Fig 2
4	Reinstall in opposite order

Fig 2: Identifying Long Wedge (115 589 03 59 00)