Removing and installing rear rubber mounts of rear axle - AR35.10-P-0040-03C

Fig 1: Identifying Removal And Installation Tool (210 589 01 43 00)

Repair materials

Number	Designation	Order number
BR00.45-Z-1002-06A	Lubricant	A 000 989 01 60

Removing rubber mount 

1. Press rubber mount (1b) out of rear axle carrier using extractor (01a-01c).
   Fig 2: Press Rubber Mount Out Of Rear Axle Carrier Using Extractor

   

Installing rubber mount 

2. Smear periphery of rubber mount (1b) with lubricant.
3. Pull in rubber mount (1b) using installation tool (01c, 01f, 01g).
   Fig 3: Pull In Rubber Mount Using Installation Tool