Measuring and noting total friction torque of drive pinion - AR35.31-P-0530-04B

Fig 1: Identifying Torque Measuring Instrument (001 589 49 21 00)

Fig 2: Identifying Connection Piece (100 589 02 59 00)

Fig 3: Identifying Socket Wrench Bit (201 589 00 09 00)

Fig 4: Identifying Socket Wrench Bit (126 589 02 09 00)

Commercially available tools

Number	Designation
WH58.30-Z-1013-06A	Wrench bit 41 mm hexagon 3/4 inch four-point

Special tool allocation

Rear axle center assembly 168 ø, 185 ø, 198 ø, 210 mm dia rear axle center assembly (with side bearing caps), Rear axle center assembly 210 mm ø in rear axle center assembly 210E (without side bearing cap):

Torque measuring instrument 001 589 49 21 00

Connection piece 100 589 02 59 00

Rear axle center assembly 168 ø:

Wrench socket 201 589 00 09 00

Rear axle center assembly 185 ø, 210 mm dia. rear axle center assembly (with side bearing caps),

Socket wrench bit 126 589 02 09 00

Rear axle center assembly 198 ø,

Rear axle center assembly 210 mm ø in rear axle center assembly 210E (without side bearing cap):

Wrench socket WH58.30-Z-1013-06A

Measure and note total friction torque at collared twelve-point or hexagon nut using socket wrench bit (040a), connecting piece (040c) and torque measuring device (040b).

Fig 5: Measuring And Noting Total Friction Torque Of Drive Pinion