Inserting sleeve for camber strut in wheel carrier - AR35.20-P-0110-02A
| AR35.20-P-0110-02A | Inserting sleeve for camber strut in wheel carrier | ||
| Diameter of wheel carrier bores modified | BT35.20-P-0005-01A | ||
| Bolted connection of camber strut to wheel carrier modified | BT35.20-P-0007-01A |
If a new camber strut (2) is installed on a previous version of the wheel carrier (attachment bore dia. in wheel carrier approx. 13.5 mm), it is absolutely essential to fit the sleeve (2h) in the wheel carrier (7) to reduce the diameter to approx. 12.2 mm.