Removing and installing fuel pumps - AR47.20-P-5713B
ENGINE 104.945 /995, 111.921 /942 /943 /945 /946 /947 /970 /973 /974, 119.981 /982 /985, 120.982 /983
Model 210 T-model
| Fig. item, etc. | Work instructions | ||
|---|---|---|---|
| Risk of explosion from ignition. Risk of poisoning from inhaling and swallowing fuel. Risk of injury as a result of fuel coming into contact with skin and eyes. | No fire, naked flame or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Arrow | Model 210 T-model | Do not pinch fuel suction hose at elbow | |
| Plastic sleeve (56) | check, replace if necessary. The plastic sleeve must project at both sides of the bracket as contact corrosion may occur if there is direct contact between fuel pump and the bracket. | ||
| Summary of components fuel pumps | GF47.20-P-0025-02A | ||
| 52, 53 | Fuel suction hose, fuel delivery hose | pinch off | |
| Fig 3 | |||
| 54a, 54b, 59 | Cap nut or banjo bolt | replace copper sealing rings (62) | |
| *BA47.20-P-1001-01A | |||
| *BA47.20-P-1002-01A | |||
| *BA47.20-P-1001-01B | |||
| *BA47.20-P-1004-01B |
| Number | Designation | Engine 104, 119, 120 | |
|---|---|---|---|
| BA47.20-P-1001-01A | Banjo bolt of fuel pipe to fuel pump or fuel filter | Nm | 27 |
| BA47.20-P-1002-01A | Cap nut of fuel pipe to fuel pump | Nm | 27 |
| Number | Designation | Engine 111 | |
|---|---|---|---|
| BA47.20-P-1001-01B | Banjo bolt of fuel pipe to fuel pump or fuel filter | Nm | 27 |
| BA47.20-P-1004-01B | Cap nut of fuel pipe to fuel pump | Nm | 27 |