Removing and installing exhaust system from pipe connection on - AR49.10-P-7281H
ENGINE 606.961 in MODEL 140.135
Fig 1: Identifying Exhaust System From Pipe Connection Remove/Install Components - Engine 606.961 In Model 140.135
| Bild-Pos., etc | Arbeits-Hinweise | ||
|---|---|---|---|
| Tube clamp (111/9) | *BA49.10-P-1003-01B | ||
| Rubber mount (111/8) | Check, replace if necessary |
| Number | Designation | Engines 604, 605, 606 except 606.964 | |
|---|---|---|---|
| BA49.10-P-1003-01B | Tube clamp, front exhaust pipe/rear exhaust system connector | Nm | 55 |