Removing and installing complete exhaust system - AR49.10-P-7000G
ENGINE 111.943 /946 /973 in MODEL 170
Fig 1: Identifying Complete Exhaust System Remove/Install Components - Engine 111.943 /946 /973 In Model 170
| Fig. item, etc. | Work instructions | ||
|---|---|---|---|
| Replace rivet nuts in exhaust manifold | If required | AR49.10-P-5531-01DA | |
| Remove left frame cross strut | *BA61.10-P-1001-01A | ||
| Replace self-locking nuts, bolts and seals. Ensure the seals and flanges are correctly installed. |
Clean off combustion and corrosion residues at connection points with emery cloth, if necessary | ||
| Notes re disposing of catalytic converters | On models with catalytic converter Code 620a | OS49.10-P-1000-01A |
| Number | Designation | Model 170 | |
|---|---|---|---|
| BA61.10-P-1001-01A | Self-locking bolt of rear cross strut to frame floor | Nm | 60 |