Removing and installing complete exhaust system - AR49.10-P-7000DA

ENGINE 111.945 /975 in MODEL 208 

Fig 1: Identifying Complete Exhaust System Remove/Install Components - Engine 111.945 /975 In Model 208

Shown on model 208 with engine 111.945 

Fig 2: Identifying Rear Muffler Bracket Projection- Shown On Model 208 With Engine 111.945

Fig. item etc.	Work instructions
	Replace rivet nuts in exhaust manifold	if necessary	AR49.10-P-5531-01DA
	Replace self-locking nuts, bolts and seals. Pay attention to correct installation of the seals and flanges.	Use emery cloth, if necessary, to remove combustion and corrosion residues at connection points
18	Rubber mount	When attaching the exhaust system, ensure that the projection "a" of the bracket at the rear muffler when cold is not more than 3 - 5 mm at the rubber mount (18) (see fig.)
	Notes for disposing of catalytic converters	on models with catalytic converter code 620a	OS49.10-P-1000-01A

Fig 3: Identifying Caulking Bolt (103 589 01 39 00)