Remove / install exhaust system as from flange connection - AR49.10-P-7280FB
ENGINE 104, 119, 120 in MODEL 140
| Remove/install | |||
| 1 | Remove flange connections at catalytic converter (2) | *BA49.10-P-1002-01A | |
| 2 | Remove rubber mount (18) at center muffler (7) | ||
| 3 | Unhook middle and rear muffler (7, 9) from rubber mounts (18) at rear muffler (9) | Check middle and rear muffler and, if necessary: ↓ | |
| Replace rear muffler | AR49.10-P-4951F | ||
| Replacing center muffler | AR49.10-P-4945F | ||
| Checking | |||
| 4 | Check flange (5a), graphite sealing rings (5b) for reusability | Replace, if necessary. | |
| 5 | Check rubber mount (18) | Replace, if necessary. | |
| 6 | Install in the reverse order |
| Number | Designation | Engine 104, 120 | Engine 119 | |
|---|---|---|---|---|
| BA49.10-P-1002-01A | Bolt, flange connection to exhaust pipe | Nm | 20 | 20 |