Removing and installing power window motor in rear door - AR72.29-P-1880EA

MODEL 202 as of 1.6.97 

Fig 1: Identifying Power Window Motor In Rear Door Remove/Install Components - Model 202 As Of 1.6.97

	Removing, installing
1	Removing and installing door liner on rear door		AR72.12-P-1010E
2	Remove window lifter at the rear door, install		AR72.12-P-1810E
3	Unscrew Intorx screw (1)		Figure
			Figure
			*BA72.29-P-1002-01A
4	Take off rear left window lifter motor (M10/5) at window lifter (2), fit on	Before installing grease gear on motor lightly The motor of the electric window lifter forms an element together with the door control module This element must always be replaced complete for operational and leaktightness reasons
5	Install in the reverse order
6	Adjust side windows	see Owner's Manual

ELECTRIC SIDE DOORS

Number	Designation		Model 202
BA72.29-P-1002-01A	Bolt of motor of electric window lifter rear door	Nm	13

Fig 2: Identifying Torque Wrench (000 589 67 21 00)

Fig 3: Identifying Internal Torx Set (000 589 01 10 00)