Jumper starting with 2nd battery or 2nd vehicle - AF54.10-P-6003-02A

Models 124, 129, 140, 201, 202, 210 

Observe instructions in vehicle owner's manual

1. Switch off all loads in vehicle to be started.
2. Connect jumper cables (positive to positive and negative to negative).

   First connect positive poles, then negative poles with one another.

3. Start vehicle with discharged battery.
4. After vehicle starts, switch on rear window defroster, heated seats and blower (highest stage).
5. Do not switch on lights.
6. First disconnect jumper cables from negative poles, then from positive poles.