Testing quiescent current - AR54.10-P-1030-03AB

Fig 1: Identifying Electrical Connection Set (201 589 00 99 00)

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1001-09A	Multimeter

Test step	Tester/test connection		Operation/requirement	Specification
			Observe multimeter limit for current tests. When the central locking system operates, a current of approx. 20 A flows.
1			Lock vehicle. Wait approx. 4 minutes (after-run time for electronic components) Model 163: If engine temperature is > 100°C, wait for approx. 5 minutes; if engine temp. is >100°C, wait approx. 10 minutes.	Displayed value ≤ 0.05 A, or ≤ 0.085 A (vehicles with immobilizer) Specified value reached: Carry out test step 2.
	G1	W10/W16/4
				Do not activate any other consumers during the test. If other consumers are activated, wait another 4 minutes (after-run time).
2			Unlock vehicle. Wait approx. 4 minutes (after-run time for electronic components) Model 163: If engine temperature is > 100°C, wait for approx. 5 minutes; if engine temp. is >100°C, wait approx. 10 minutes.	Displayed value ≤ 0.05 A, or ≤ 0.085 A (vehicles with immobilizer) Specified value reached: End of test
	G1	W10/W16/4
				Do not activate any other consumers during the test. If other consumers are activated, wait another 4 minutes (after-run time).